Tag Archives: wood board

48_Screws and String Shapes

30 Dec

If paper and coloured pencils are not your thing, why not try Screws and String?!

© 2011 Fernanda de Uriarte

This one takes about 3 hours. This one is kind of challenging and I recommend that you make it with the help of a grown up.

You’ll need

_A wood or MDF board about 20x20x1.8 cm

_Black paint

_Pencil and ruler

_50 screws

_Hammer and 1 nail

_A screwdriver

_Yarn

How to make Screws and String shapes

1. Paint the board black and let it dry completely.

2. Make an 8×8 grid. Each square in the grid should be 2.5×2.5 cm.

3. Mark the intersections of the lines that make up the grid. Those are the spots where you’ll put the screws. You’ll have 49 intersections (7×7)

© 2011 Fernanda de Uriarte

4. To make it easier to screw the screws, make a small hole on each intersection with the nail and hammer. A couple of hits should be enough.

5. Now put a screw on each intersection. Leave about 5mm sticking out of the board. You’ll have 49 screws total.

© 2011 Fernanda de Uriarte

6. Now get the yarn and make a hoop on one end.

7. Put the hoop into one screw and go from screw to screw to make some great string shapes!

© 2011 Fernanda de Uriarte

You can make very geometric and abstract shapes…

© 2011 Fernanda de Uriarte

© 2011 Fernanda de Uriarte

Or your favorite animals… how about an elephant?

© 2011 Fernanda de Uriarte

…or a bunny!

© 2011 Fernanda de Uriarte

You can even practice your abc’s!

© 2011 Fernanda de Uriarte

The truth is you can make whatever you like! change the colours, move the yarn around the screws and see what string shapes you can make…